Products

DESCRIPTION

Basic Info

Model NO.	test machine
Power	Electric, 1.5kw, 220V/380V
Fuel	Diesel
Structure	Other
Pressure	High Pressure
Size	420X800X1100mm
Usage	for The Water Pressure Test Machine Remnant Ratio.
Transport Package	Woodencase
Trademark	welfare
Origin	Zhejiang, China (Mainland)

Product Description

SYS Automatic Hydraulic Test Machine (400kg)

SYS Automatic Hydraulic Test Machine(250kg)

SYS Automatic Hydraulic Test Machine(63kg)

Product Description

Company Information FAQThe hydro pressure-testing machine is a set of devices used to test the interior pressure of the fire extinguisher (or the gas cartridge), and measure the ratio of permanent volumetric expansion of the cylinder through the interior pressurization test. It mainly comprises of an electric pressure test pump and an electric control device.

This machine has the advantages of mobility. The motor and reduction gearbox are installed on the water tank cap. Worm-wheel type reduction gearbox, and worm drive. The velocity ratio is 2:45. And there is an eccentric shaft on each side of the worm wheel, and they are 180o to each other. With the slider and crosshead inside the outer transmission gearboxes on both the side caps, they convert the rotary motion into reciprocating type rectilinear motion so as to achieve the alternative inhaling and disgorging process of the pump.

There is a 60Mpa pressure gauge with electric contacts installed on the top of the testing pump to set the controlled pressure arbitrarily. When the discharge pressure reaches the testing pressure, the pressure with electric contacts will send out signals, and the power of the motor will be switched off automatically. The record of the burette will reflect if the cylinder meets the requirements of the pressure testing.

Above the machine case handle, there is an electric control device, which has a startup button (green) and a stop button (red), by which you can control the operation of the testing pump manually. And there are fuses, AC contactors, etc. in the case.

. Technical ParametersSpecifications:

SYS Automatic Hydraulic Test Machine (400kg) FOB USD 1800/SET

SYS Automatic Hydraulic Test Machine(250kg) FOB USD1700/SET

SYS Automatic Hydraulic Test Machine(63kg) FOB USD1500/SET

1.
Type: 4DY-30/40
Volume: 805×480×1210 mm
Weight: 230Kg
Quantity of Flow: 30 at high pressure, 360 at low pressure (L/H)
Power: 1.5KW
Rated Discharge Pressure: 25mpa
2.
Type: 4DY-1 Type 46/63
Volume: 740×370×1140 mm
Weight: 158Kg
Quantity of Flow: 146 at high pressure, 320 at low pressure (L/H)
Power: 1.1KW
Rated Discharge Pressure: 6.3mpa

NAME	QTY/CTN	N.W/CTN	G.W/ CTN	CBM/CTN	CTN SIZE
DESCRIPTIONS	pcs	kg	kg	M3	cm
SYS Auto Hydraulic Tester	1	190.00	242.00	0.780	105*55*135